- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
merken
categorieën
zoek

SHOP:

TOON INFO

Bones Swiss Ceramics are in a class by themselves. If you want the best there is, this is it. The ceramic balls are much lighter, harder, stronger, waterproof, and longer lasting than the finest steel balls. Made in Switzerland.

Features

Accelerate faster.
Roll faster and farther.
Resist dirt and moisture better.
Help to repair injuries to your races caused by dirt.
1 non-contact, removable rubber shields allow easy cleaning.
High speed nylon ball retainer for greater strength and speed.
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.

Contents

Set of 8 bearings
4 bearing spacers
Instructions
Sticker

Dit item is momenteel niet op voorraad

Voorraad: 0
€ 199.95

Dit item is momenteel niet op voorraad

Voorraad: 0
€ 34.95

Each Bones Race REDS Bearings is made with upgraded top quality bearing steel, ground to perfection and polished, best for racers who use precision trucks and properly tighten their axle nuts

Precision ground 0.200 built in spacer to provide perfect 0.400 spacing between bearings.

Precision ground extended race eliminates the need for speed washers, and provides better alignment of the bearings when the axle nut is tightened.

Lubricated with Bones Speed Cream

A groove on the inside of each bearings inner race eliminates weight and allows insertion and removal of the bearing using the Bones Bearing Tool, even on hub wheels

Features

    Precision ground, Skate Rated™ Racing bearings by Bones®
    Removable high-speed Nylon™ ball retainers
    Removable Non-Contact frictionless shield for easy cleaning
    Integrated bearing spacer to provide perfect 0.400" spacing
    Extended race replaces need for spacers and washers
    Extended race provides perfect alignment for greater speed and axle reinforcement
    Fewer parts mean faster set up

Dit item is momenteel niet op voorraad

Voorraad: 0
€ 44.95

BIG BALLS, the newest member of our REDS family.  BIG BALLS are engineered to roll faster and last longer by using 6, 17% larger balls, like our legendary Bones Super Swiss 6 bearings.  These larger balls let you roll faster, and keep rolling right through dirt that slows smaller balls down.  This makes BIG BALLS a great choice for skaters looking for more speed and longer life in their bearings.

Skaters have made the Bones REDS family of bearings their #1 choice because of the consistent quality, speed, durability, and value.

DETAILS

Higher top speed
Greater strength
Longer life
Easy cleaning
Light weight
Skate Rated™ design
CONTENTS

Set of 8 bearings
Instructions
Sticker

Voorraad: 2
€ 29.95
Voorraad: 1
€ 17.50
size:

Bronson Speed Co. RAW Next Generation Shieldless Bearings
Next Generation Shieldless Bearings, Designed for Today’s Skateboarding
“Free at Last!” - Shield Free Design No more shields to get damaged or pop off – the first shield-less bearing designed for skateboarding No shield grooves in either race for no crud, dust and dirt build up - super fast sound and spin
“Fast, Slick & Non-Stick” - Tungsten Coated Races
Micro-thin tungsten dry lubricant coating is fast, slick and non-stick to minimize dirt, dust and crud build up. Tungsten coating is an extremely slick, low drag, long life dry film lubricant with a very low coefficient of friction – Tungsten coating works well with or without liquid lubricants.

“The Sound Of Speed” – Audible Speed Technology Fully open, high spin, and shield free RAW’s are designed to enhance the sound of speed. Run your bearings with no shields? Minimal oil? Like a RAW sound? This bearing’s for you!
“Maximum Impact” - Cage Design Super strong, durable, non-distortion fiberglass filled pure nylon cage keep the balls precision spaced. High wear and tear resistance, increased performance in a low lubricant/increased dust and dirt environment.

“Rollin’ Deep” - Deep Groove Raceways Balls sit and roll deeper in the raceway channels than weaker shallow groove designs. Dramatically reduces axial and angular side impact damage and breakage, surfaces stay smooth and fast.

“Shred Ready” - Factory Fresh Quality 100% hand inspected twice and micro-polished & ultrasonic solvent washed 3X prior to final packaging. Packaged in nitrogen filled packaging – reduces metal and oil oxidation until ready to be ridden.

Dit item is momenteel niet op voorraad

Voorraad: 0
€ 59.95

The Bronson Speed Co. G2 skateboard bearings deliver top shelf performance with affordability in mind. Straight edge, friction-less shields are pop-off resistant to hold in oil and keep moisture out, while linear micro-groove surfaces improve bearing lubrication and increase roll speed. Nano-ceramic compounds resist corrosion and prevent excessive wear. Bronson Speed Co. crammed all this tech into these bearings for a reason: to give you the smoothest, longest lasting roll at a reasonable price.

FEATURES
Quantity
Set of 8 Bearings

Details
Deep Groove Raceways
Straight Edge Frictionless Shields
High Speed Ceramic Oil
Hand Inspected for Quality
DETAILS
Deep Groove Raceways - Balls sit and roll deeper in the raceway channels than weaker shallow groove designs.

Reduces axial and angular side impact damage and breakage, surfaces stay smooth and fast.

Straight Edge Frictionless Shields - Non-contact rubber shields fit deep in the inner race edge- reduces oil leak and dirt & moisture intrusion.

Free spinning, durable, pop off resistant shields, serviceable, remove-able, easy to clean and re-install.

High Speed Ceramic Oil - Oil is blended with nano-ceramic compounds for anti-wear protection for longer lasting bearings and improved speed.

Light and smooth- with additives that resist rust, moisture, corrosion and oxidation for prolonged oil life.

Hand Inspected for Quality - 100% hand inspected twice and micro-polished and ultrasonic solvent washed 3X prior to final lubrication.

Packaged in nitrogen filled shrink-wrap - reduces metal and oil oxidation until ready to be ridden.

Voorraad: 1
€ 27.95

Next Generation Bearings, Designed for Today’s Skateboarding G3’s


• Deep Groove Raceways-balls roll deep in raceway channels - reduces side impact damage & breakage
• Straight Edge Frictionless Shields-pop off resistant - holds oil in, dirt and moisture out- easy to clean
• Micro Groove Raceway Surfaces-linear micro-groove surfaces improve bearing lubrication, speed and spin
• Max Impact Cage Design-non- distortion custom cage keeps the balls precision spaced & oil circulating
• Balls Out Technology-eliminates shield and cage contact on impact for a go fast, stay fast bearing
• High Speed Ceramic Oil-nano-ceramic compounds for wear protection - moisture, rust, corrosion resistant
• Factory Fresh Quality-nitrogen filled shrink wrap, reduces metal & oil oxidation until ready to be ridden

-Comes with free spacers and speedwashers!

Voorraad: 1
€ 39.95

Finally, a bearing cleaning unit brought to you by the bearing company by which all quality standards are measured.

FEATURES
Made of fluorinated high density polyethylene
7 spacers for a good flush in less time
Cleans up to 8 bearings at a time
Cleans all skate bearings
Bearings and solvents not included


CONTENTS
A detailed instruction sheet will also be included with the unit to insure easy and proper use.

Voorraad: 1
€ 22.00

Bones® Speed Cream® is a high temperature, low viscosity synthetic skate lubricant specially formulated by Bones® to reduce friction, and provide a durable micro film of lubricant to protect against corrosion. We have found this lubricant to be superior to Teflon® based lubricants in skate environments. Speed Cream® makes your bearings faster and is very long lasting.

CONTENTS
Sticker and instructions

Voorraad: 1
€ 13.50

Bones - Mini Logo Bearings

Mini Logo™ Bearings are Skate Rated™, precision 608 bearings made to Skate One specifications. They have a removable rubber shield on one side, a removable metal shield on the other, a high speed molded ball retainer, precision ground and super-finished hardened chromium steel races and balls, and come pre-lubricated with Speed Cream™... twice the performance and half the price you would expect.

Features:
• High Performance, Skate Rated™ Construction
• Chromium Steel Balls & Rings
• Precision ground & Super-finished Raceways
• High Speed, Extra Tough Ball Cage (Removable)
• Flexible Rubber Shield on One Side (Removable)
• Rigid Metal Shield on One Side (Removable)
• Speed Cream™ Synthetic Racing Oil

Voorraad: 2
€ 14.95
Voorraad: 2
€ 19.95
size:

Super REDS®are designed from the ground up to be the best bearing on the market at this price point. What Super REDS® are not is a REDS® bearing with just better super finishing (surface polishing). Super REDS® are a superior quality bearing, using higher quality steel races, better quality and grade balls, and a superior surface finish. The result is a bearing that is as fast as REDS® but quieter, smoother, and longer lasting. Super REDS® use a black shield and laser engraving to differentiate themselves from original REDS®.

FEATURES
Higher quality steel races, better quality and grade balls, and a superior surface finish.
Single, non-contact, removable rubber shield for easy cleaning and less friction.
Pre-lubricated with Speed Cream® racing lubricant.
High speed nylon ball retainer for greater strength and speed.
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.

CONTENTS
Set of 8 bearings
Instructions
Sticker

Voorraad: 2
€ 39.95

This unique design features six larger diameter balls instead of the seven balls used in most 608 bearings. The advantage of this design is higher speed, faster acceleration, greater strength and durability.

FEATURES
Single, non-contact, removable rubber shield allows for easy cleaning and less friction.
High speed nylon ball retainer for greater strength and speed.
Pre-lubricated with Speed Cream® racing lubricant.
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.

CONTENTS
Set of 8 bearings
4 bearing spacers
Instructions
Sticker

Dit item is momenteel niet op voorraad

Voorraad: 0
€ 99.95

Bones® REDS® are manufactured in China to our Bones Skate Rated® specifications in a manufacturing facility dedicated to producing the highest quality skate bearings in China. They are inspected twice before being shipped to skaters and offer the greatest combination of performance, durability and low cost in the industry. Because they offer near Bones® Swiss performance at a fraction of the cost, they have become the best selling bearing brand in the U.S.A.

FEATURES
Single, non-contact, removable rubber shield for easy cleaning and less friction.
High speed nylon ball retainer for greater strength and speed.
Pre-lubricated with Speed Cream® racing lubricant.
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.

CONTENTS
Set of 8 bearings
Instructions
Sticker

Voorraad: 2
€ 24.95

Legendary Original Bones® Swiss Bearings are the optimum combination of Bones Skate Rated™ design and Swiss precision manufacturing creating the standard by which all other bearings are measured. For more than 24 years preferred by the world’s top professional skaters. Proven, professional competition-grade speed and durability make Bones Swiss normally last several times as long as ordinary ABEC rated bearings.

FEATURES
Single, removable, non-contact rubber shield allows easy cleaning and low friction.
High speed nylon ball retainer provides added strength and speed.
Pre-lubricated with Speed Cream® racing lubricant.
Skate Rated™ clearances, tolerances, materials and lubricant provide the best performance and durability possible.
Best selling high end skate bearing in the U.S.A.

CONTENTS
Set of 8 bearings
4 bearing spacers
Instructions
Sticker

Voorraad: 1
€ 99.95